Chisel Redistribution Tool | Bright Red
- Regular Price
- Sale Price
- Regular Price
- Unit Price
High-quality redistribution tool for distributing the ground coffee before tamping
- stepless height adjustment
- light weight (431.5 g)
- starts at 6% surface coverage
- the steep angle chisel design avoids local compression of the coffee grounds
- a low-friction surface makes spinning easier and prevents overloading
- hand-polished base minimizes static electricity
- 316 grade stainless steel
Any coffee pressing down is tamping - and that is to be avoided as much as possible in this step.
In order to come close to the ideal of an absolutely even and consistent puck density and flatness, a successful compromise between vertical (compression, tamping) and horizontal (distribution, redistribution) movement is necessary. In other words, the chisel must be set deep enough so that as much ground coffee as possible is distributed, but not too deep so that individual areas are not pre-tamped unevenly. The result is optimal when the ground coffee is evenly distributed, but still loose enough to be able to compress when tamping.
Regardless of the depth set for the Chisel, the 'footprint', i.e. the area of the compressed ground coffee when the Chisel is in place, has been reduced to just 6% - compared to competing products, which often start at 30%.
Powder coatings are paints that are applied to metal and other conductive surfaces. They generate less waste than liquid coatings and are free of organic solvents. The material to be coated - here the aluminum handle - is negatively charged by electrical voltage. The positively charged powder adheres to the resulting electrical field and is baked in the oven.
Powder coatings are easy to clean, available in every imaginable color and wonderfully customizable. Slightly more sensitive to impact and scratch damage than anodized chisel.
Important: even the best redistribution tool only works with an acceptable initial distribution. This means that you have to make sure that your grinder doesn't scatter too much or eject to the basketrand. In this case, please always 'pre-adjust' the ground coffee a little with your finger, i.e. push it into the middle. However, this is usually not necessary if the mills are set correctly.
Enter the content to use inside the tab selected.